64GB SATA III 6Gb/s 3D TLC NAND mSATA Solid State Drive

Description:

• 3D NAND Flash Technology

• Global Wear Leveling and Early weak block retirement

• TRIM, NCQ, DEVSLP, ATA Security Feature Set supported

• Lifetime Enhancements

-Direct-to-TLC and SLC Cache enhancement to ensure the optimized WAF

-Block/Page RAID function to ensure data recovery

- StaticDataRefresh to keep data integrity

• Reliable Industrial grade integrated Active PMU and complete protection design with OVP, OCP, Surge rejection and Short protection

• External DRAM to achieve the optimal sustained read/write performance (R/S series)

• Power shielding firmware architecture to ensure power failure resilience

• Warranty: 3 years and within TBW

Specifications:
• Form Factor: mSATA Solid State Drive (51 mm x 30 mm x 3.5 mm)
• Compliance: SATA Revision 3.1 - 6 Gbit/s (3 Gbit/s and 1.5 Gbit/s backward compatible)

• Command Sets: Supports ATA/ATAPI-8 and ACS-2

• Performance:

- Sequential Read/Write (max. ): 350/165 MB/s

- Random 4K Read/Write (IOPS max.): 25000/18000

• Operating Temperature Range: 0 °C to 70 °C

• Storage Temperature Range: -55 °C to 95 °C

• Operating Voltage: 3.3 V ± 10%
• Power Consumption (max.)

- Read (active) : 445mA

- Write (active): 405mA

- Stand-by: 160mA

• Data Retention @40 °C: 10 Years @ Life Begin; 1 Year @ Life End

• Endurance in Tera Bytes Written (TBW) : 93 TB

*TBW is estimated by formula TBW= (Capacity x PE Cycles)/ (WAF x2). Assumption of guard band for the wear leveling is 2.

• Mechanical (IEC-60068)

- Vibration: 15G, 10 ~ 2001Hz

- Drop: 76cm

- Shock: 1,500G@0.6ms

• LDPC ECC with up to 120 bit correction per 1 KByte page to ensure reliable 3K PE cycles
• Mean Time Between Failure: > 2,000,000 hours
• Data Reliability: Non-recover Read (UBER) ≤10 -16

• Serious quality control and assurance

- 100% NAND Flash screening.

- High endurance product design with SLC and pSLC product offerings.

- Implement high/low temperature dynamic burn-in in each lot production to monitor production quality to meet design specification.

- Reliability criteria compliant with international standards IEC-60068/61000.